you will need a named selection of the concrete bodies that you wish to change.

To do many elements at once, insert a snippet in the analysis environment with the following. Solid 65 is an archived element type so the only way to modify this is through command snippets. With this command snippet the solve would fail, as reinforcing elements do not have the same shape (number of nodes) as link elements. The definitive guide to the ANSYS Parametric Design Language (APDL), the command language for the ANSYS Mechanical APDL product from ANSYS, Inc. I also noticed in your first picture that Model Type is set to Reinforcement. MFEXTER - Defines external fields for an ANSYS Multi-field solver analysis. MFEM - Add more element types to a previously defined field number. MFELEM - Defines a field by grouping element types. MFDTIME - Sets time step sizes for an ANSYS Multi-field solver analysis. You can then also create a new material in engineering data that has the material properties (Modulus, Poissons, and biliniear isotropic hardening) that are in your script and apply that material to the links MFCONV - Sets convergence values for an ANSYS Multi-field solver analysis. You can set Model Type to Link/Truss and this acheives the same thing as specifying LINK180. SFA - Specifies surface loads on the selected areas.SFACT - Allows safety factor or margin of safety calculations to be made.SFADELE - Deletes surface loads. If Lab IMPD, VALUE is resistance in (N) (s)/m 3 if VALUE > 0 and is conductance in mho if VALUE < 0 for. If Lab SHLD, VALUE is the surface normal velocity in harmonic analysis and the surface normal acceleration in transient analysis for acoustics. Your command snippet is nothing but changing the element type to links, and then specifying a material property. A pair of ports of the 2×2 transfer admittance matrix must be defined in the same element.

Ansys apdl command sfa